Description
Sensor profundidad par rov hasta 300mts
Este sensor de presión puede medir hasta 30 bar (300 m de profundidad) con una resolución de profundidad de 2 mm. Es resistente al agua y está listo para instalar, lo que lo convierte en una opción ideal para ROV, AUV, sensores remotos e instrumentación subacuática. Compatible con ArduSub en BlueROV2 y con dispositivos Arduino y Raspberry Pi.
Specifications
| Parameter | Value | |
|---|---|---|
| Electrical | ||
| Supply Voltage | 2.5 – 5.5 volts | |
| I2C Logic Voltage (SDA and SCL) | 2.5 – 3.6 volts | |
| Peak Current | 1.25 mA | |
| Mating Connector | 4-pos JST GH available on Digi-Key | |
| Pressure | ||
| Maximum Mechanical Pressure | 50 bar* | 725 psi* |
| Operating Pressure | 0 – 30 bar | 0 – 435 psi |
| Operating Depth | 0 – 300m | 0 – 990 ft |
| Relative Accuracy (0-45°C) | ± 200 mbar (204 cm in fresh water) | ± 2.9 psi (6.69 ft in fresh water) |
| Resolution | .2 mbar (2 mm in fresh water) | |
| Temperature | ||
| In Air Operating Temperature | -20 to +85°C | -4 to 185°F |
| In Water Operating Temperature | 2 to 40°C | 35.6 to 104°F |
| Storage Temperature | -40 to +85°C | -40 to 185°F |
| Absolute Accuracy | ± 1.5°C (between 0 to 60°C) | ± 2.7°F |
| Physical | ||
| Recommended Through Hole Size | 10.2 mm | 13/32″ |
| Interfacing | ||
| ArduSub Compatible? | Yes | |
| Development Libraries | MS5837 Arduino, MS5837 Python, MS5xxx ArduPilot |
|
| *Subjecting the sensor to the absolute maximum mechanical pressure may cause damage to the sensor | ||
2D Drawings
Reviews
There are no reviews yet.